Pilot's Guide

4-120
Garmin G500/600 Pilot’s Guide
190-00601-02 Rev. H
Cover TOC
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Diameter/Route Width GFDS Data Request
1) After selecting a coverage option in the previous section, the Diameter/Route
Width field will now be highlighted.
Figure 4-100 Waypoint GFDS Data Request Range
2) Turn the small MFD knob to select the desired Diameter/Route Width and then
press ENT .
4.10.4.2 GFDS Data Request Auto Request
1) Turn the large MFD knob to highlight “Auto Request - Update Rate.”
2) Turn the small MFD knob to select “Off” or an Update Rate. When finished
selecting the Update Rate, press ENT . The Update Rate will default to “OFF”
at each power cycle.
Figure 4-101 GFDS Data Request Auto Update Rate