Pilot's Guide

4-76
Garmin G500/600 Pilot’s Guide
190-00601-02 Rev. H
Cover TOC
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Winds Aloft Data Viewing Range
The Winds Aloft Data Viewing Range option allows you to select the map
range where at and below that value Winds Aloft weather products will appear
on the selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected,
Winds Aloft will not be shown. Where a value (such as 100 NM) is selected,
Winds Aloft data will be shown at map ranges of the selected value (100 NM)
and lower.
1) While viewing Weather Setup 1/2 menu, turn the large MFD knob to highlight
the Winds Aloft Data Viewing Range value.
2) Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
3) Press the small MFD knob to cancel selection or to end editing and return to
the previously viewed page or turn the large MFD knob to the next option.