Pilot's Guide

3-48
Garmin G500/600 Pilot’s Guide
190-00601-02 Rev. H
Cover TOC
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
3.2.4.2 Resolving Database Conflicts
If the G500/600 determines that there are multiple LRUs with the newest
cycle of a database, but they have different regions or types of that database (i.e.;
Fixed-wing vs. Rotorcraft navigation database, different regions of the navigation
database, or different obstacle database types) then a database conflict will
occur. When a database conflict occurs, that database will not be SYNC’d until
the pilot resolves the conflict. Initiate the resolve conflicts function on the unit
that contains the databases which the pilot wishes to use. These databases will
then be sent to other units.
1. Press the DB SYNC soft key, and then select the Resolve
Conflicts function on the LRU with the desired databases.
Figure 3-60 Database Conflicts