Instruction Manual

500W Series 190-00357-65 Rev. D
Instructions for Continued Airworthiness Page 10 of 12
Figure 2. Flight Stream 210 Bonding
Table 1. Flight Stream 210 Bonding Hardware
See Figure 2 Hardware P/N
1 Screw MS35206 (AN515) #8 Pan Head Screw
2 Lock Washer MS35338-42 #8 Lock Washer
3 Flat Washer NAS1149FN832P (AN960C8) #8 Washer
4 #8 Ring Terminal MS25036 #8 Ring Terminal
5 Screw MS51957-42 #6 Screw
6 Braid QQB575R36T0250 or larger
2.8 Diagrams
Refer to the 500W Series Installation Manual (listed under reference documentation in section 2.1 of this
document) for drawings applicable to this installation. Point to point wiring diagrams are in Appendix H
of the 500W Series Installation Manual. Refer to the GNS 500W Series Post-Installation Checkout Log
retained in the aircraft permanent records for a list of the interfaced equipment. The antenna cables are
routed between the 500W series unit and the antenna with disconnects at each unit. The antenna cable
typically is routed behind interior panels in the fuselage.
2.9 Special Inspection Requirements
None, N/A.
2.10 Application of Protective Treatments
None, N/A.
2.11 Data Relative to Structural Fasteners
None, N/A.