User Guide

Garmin G1000 Trainer User’s Guide

190-00419-01 Rev.

G1000 TRAINER OPERATION

Failure Presentation

Attitude and Heading Reference System (AHRS), Air Data Computer (ADC), Magnetometer, Integrated Avionics Unit, and Engine/

Airframe failures can be simulated at any time while the G1000 system is running by turning off the associated Line Replaceable Units

(LRUs). To simulate failures, the following LRUs can be deselected/turned off in the LRU Online Status window:

• GRS (Attitude and Heading Reference System –

GRS 77)

• GDC (Air Data Computer – GDC 74A)

• GMU (Magnetometer – GMU 44)

• GIA 1 & 2 (Integrated Avionics Units – GIA 63)

• GEA (Engine and Airframe Unit –

GEA 71)

Figure 8 LRU Online Status Window

To display various G1000 system failures:

1. Ensure that the control display is set to Reversionary mode so as to allow the full range of failures to be displayed.

2. Click the ‘Options’ menu and select ‘Online LRUs’.

3. Deselect the LRU(s) for which a failure is to be simulated and click ‘OK’.

Simulating Flights

Both the practice exercises presented in the G1000 Pilot’s Training Guide and the procedures included in the G1000 Multi Function

Display Pilot’s Guide can help to provide the user with ﬂight scenarios and may thus be followed to simulate ﬂights in G1000-equipped

aircraft.

HELP MENU

The G1000 Trainer Help menu can be accessed at any time and contains the following two options:

• G1000 Trainer Help – provides information that is similar to that included in this document.

• About – provides copyright and software application version information.