User Guide

Garmin G1000 Trainer User’s Guide
190-00419-01 Rev.
C
9
G1000 TRAINER OPERATION
Demo Mode
If no external joystick is connected to the PC, the G1000 Trainer operates in Demo mode. In Demo mode, control inputs cannot be
simulated in real time. However, a number of flight parameters can be configured in the Demo Mode window in order to allow flight
simulation. The available configurable flight parameters are as follows (see figure below):
• TRK MODE – Track mode may be set to either ‘TRK FPL’ or ‘MANUAL’. In TRK FPL (track flight plan) mode, HEADING is set
automatically.
• HEADING – Heading can only be changed when TRK MODE is set to ‘MANUAL’.
• AIR SPEED
• POSITION
• WAYPOINT
• ALTITUDE
• VERT SPD – Vertical speed
• WIND DIR – Wind direction
• WIND SPD – Wind speed
• GPS SOLUTION
• FUEL ONBOARD
• FUEL FLOW
NOTE: The Demo Mode window can only be accessed from the MFD.
Figure 7 Demo Mode Window
To display the Demo Mode window:
1. Ensure that the display is in MFD mode.
2. Click the MENU key twice.
To set the flight parameters in the Demo Mode window:
1. Use the FMS knob and the ENT key to change the flight parameters as desired.
2. Press the FMS knob to close the Demo Mode window.