User Guide

Garmin G1000 Trainer User’s Guide
190-00419-01 Rev.
C
7
G1000 TRAINER OPERATION
Keyboard Shortcuts
A number of G1000 controls can also be activated on the G1000 Trainer, using keyboard shortcuts. The following shortcuts are
available:
• ‘W’ activates the power button.
• ‘F1’ to ’F12’ respectively activate softkeys 1 through 12 (where softkey numbers are defined by the position of the softkey from
left to right on the bezel).
• ‘N’ (same as ‘F11’) displays and hides the NRST window – PFD only.
• ‘Y’ (same as ‘F12’) displays and hides the ALERTS window – PFD only.
• ‘D’ activates the Direct-to key
• ‘M’ activates the MENU key.
• ‘F’ activates the FPL key.
• ‘P’ activates the PROC key.
• ‘ESC’ activates the CLR key.
• ‘Enter’ (carriage return) activates the ENT key.
• The space bar presses the FMS knob.
• The arrow keys rotate the FMS knob as follows:
- Down arrow turns the large FMS knob clockwise (upper right arrow on the display).
- Up arrow turns the large FMS knob counterclockwise (upper left arrow on the display).
- Right arrow turns the small FMS knob clockwise (lower right arrow on the display).
- Left arrow turns the small FMS knob counterclockwise (lower left arrow on the display).
• The number keys on the number keypad activate the bezel joystick used to pan the map.
NOTE: The number keypad shortcuts are not available on laptop computers.
• ‘Alt’ + ‘F’ pulls down the ‘File’ menu.
• ‘Alt’ + ‘O’ pulls down the ‘Options’ menu.
• ‘Alt’ + ‘A’ pulls down the ‘Airframe’ menu.
• ‘Alt’ + ‘H’ pulls down the ‘Help’ menu.