User Guide

Garmin G1000 Trainer User’s Guide

190-00419-01 Rev.

G1000 TRAINER OPERATION

OPENING AND POWERING UP THE G1000 TRAINER

To open the G1000 Trainer:

1a. Double-click the G1000 Trainer shortcut located on the PC desktop (the ‘Shortcut on Desktop’ option is selected by

default at installation).

1b. Click the G1000 Trainer shortcut located in the PC Start menu under ‘Programs’ (the ‘Shortcut in Start Menu’ option

is selected by default at installation).

1c. Double-click the G1000 Trainer software application ﬁle located in the destination folder selected at installation.

To power up the G1000 Trainer:

1a. Click the power button located at the top left corner of the G1000 Trainer bezel.

1b. Click the ‘File’ menu and select ‘Power-up’.

NOTE: Only when the G1000 system is powered up in MFD mode is the Power-up Page displayed. The Power-up Page pro-

vides checklist information as well as land, terrain and aviation database information. To exit the Power-up Page and display

the MAP Page, press the ENT key (press this key twice if the Power-up Page information is still being scrolled or once if this

information is no longer being scrolled).

PAUSING THE G1000 TRAINER

Pausing the Trainer pauses the airspeed, altitude, vertical speed and position of the aircraft.

To pause the G1000 Trainer:

1. Click the ‘Options’ menu and select ‘Pause’.

NOTE: To resume the G1000 Trainer session, deselect the ‘Pause’ option in the ‘Options’ menu.

STOPPING AND CLOSING THE G1000 TRAINER

To stop the G1000 Trainer:

1. Click the power button.

To stop and close the G1000 Trainer:

1a. Click the ‘File’ menu and select the ‘Exit’ menu option.

1b. Click the ‘x’ icon located at the top right corner of the G1000 Trainer window.