User Guide

190-00368-06 Rev. A Garmin G1000 Pilot’s Training Guide Instructor’s Reference 39
Ground Lesson 12
WEATHER OPERATION
Objectives
Upon completion of this lesson, the pilot should be able to understand and interpret weather
information displayed in the cockpit. The pilot will be able to use this supporting information to
enhance the decision-making process before and during the flight.
Resources
• G1000 Pilot’s Guide
• G1000 PC-based Simulator
• www.xmradio.com
• www.wxworx.com
Exercise 12.1: Weather and Digital Audio Entertainment
1. Briefly describe how weather and radio information are provided to the aircraft.
WxWorx’s current weather information is delivered through continuous satellite
broadcast of data from XM’s Satellite Network. Weather data is retrieved and updated
constantly from WxWorx sources located at thousands of points across the United States.
XM’s satellite delivery solution is driven by two commercial satellites. Both satellites
simultaneously transmit data and are always in view of the United States. With an XM
service subscription, the GDL 69/69A Datalink Receiver receives XM Weather data and
displays it, as appropriate, on the PFD and MFD.
2. What types of datalink weather are displayed on MFD/PFD and how can these weather
products be selected for display?
Multi Function Display
1. TFRs are always displayed on all maps.
2. Display of Cell Movement for all MFD pages is controlled through the Weather
Datalink Page Setup Menu.
3. Navigation Map Page
: NEXRAD and XM Lightning data can be displayed by pressing
the MAP Softkey, followed by the appropriately labeled softkey.
4. Weather Datalink Page
: All available weather products can be displayed via
softkeys.
5. Weather Information Page
: On the first WPT page, press the WX Softkey to display
METAR and TAF text information.
6. AUX - Trip Planning Page Map
: NEXRAD and XM Lightning data are displayed by
pressing the MAP Softkey, then appropriately labeled softkey.
7. Nearest Pages
: NEXRAD and XM Lightning data can be displayed by pressing the
MAP Softkey, followed by the appropriately labeled softkey.
8. Flight Plan pages
: NEXRAD and XM Lightning data can be displayed by pressing the
MAP Softkey, followed by the appropriately labeled softkey.
Primary Flight Display
To display NEXRAD and XM Lightning on the Inset Map, press the INSET Softkey,
then the appropriately labeled softkey. TFRs are always displayed.