User Guide

190-00368-05 Rev. A Garmin G1000 Pilot’s Training Guide 23
Exercise 6.4: Practice (Optional)
Using the G1000 PC based Simulator, power up the system.
1. Verify the Jeppesen database effective dates and note those dates in the space provided
below.
2. Enter the transponder code “1252” and set the transponder to ‘ALT’ mode.
3. In COM1, enter the ATIS frequency for KAPA as the active frequency and the ground control
frequency as the standby frequency.
4. In COM2, enter the KAPA Tower frequency as the active frequency and the departure
frequency for an eastbound departure as the standby frequency.
5. Tune in and place Thurman, CO VOR (TXC) into the active NAV1 frequency; tune in and
place Byers, CO VOR (BVR) into the active NAV2 frequency.
6. Create a flight plan from KAPA to KIXD via Thurman, Goodland, Hill City, Salina, and
Topeka VORs and the RUGBB intersection.