User Guide

16 Garmin G1000 Pilot’s Training Guide 190-00368-05 Rev. A
Exercise 5.2: Practice (Optional)
Using the G1000 PC-based Simulator, power up the system.
1. Verify the Jeppesen database effective dates and note those dates in the space provided
below.
2. Enter the transponder code “3470” and set the transponder to ‘ALT’ mode.
3. In COM1, enter 124.30 MHz as the active frequency and 133.00 MHz as the standby
frequency.
4. In COM2, enter 135.325 MHz as the active frequency and 118.90 MHz as the standby
frequency.