User Guide

Garmin G1000 Pilot’s Guide Appendices 190-00383-01 Rev. A
C-4
APPENDIX C
How do I re-select the same approach or activate
a new approach after a missed approach?
After flying the missed approach procedure, the pilot
may reactivate the same approach for another attempt
from the Procedures Page. Once the clearance is given
for another attempt, activate the approach from the Pro-
cedures Page by highlighting “Activate Approach?”, then
pressing the ENT key. The G1000 provides navigation
along the desired course to the waypoint and rejoins the
approach in sequence from that point on.
To activate a new approach for the same airport, se
-
lect the new procedure from the Procedure Page. To view
the Procedure Page, press the PROC key and rotate the
large FMS knob to highlight “Select Approach?”. Select
the desired approach from the list shown and press the
ENT key. Select the desired transition, then activate the
approach using the ENT key.
To activate a new approach to a different airport, press
the Direct-to key and select the desired airport using
the small and large FMS knobs. Press the ENT key to
accept the selected airport, then follow the steps in the
preceding paragraph to select an approach for the new
airport.
NOTE: Do not attempt to reactivate the same
approach you’re currently on, prior to crossing
the missed approach point (MAP). If you attempt
to do so, an alert message “Are you sure you
want to discontinue the current approach?”
appears. If you still proceed with reactivating
the approach, the G1000 directs you back to the
transition waypoint and does NOT take into con-
sideration any missed approach procedures.