User Guide

Garmin G1000 VHF NAV/COM Pilot’s Guide for Mooney M20M & M20R190-00445-00 Rev. A

4-11

OPERATION – NAV

SELECTING A NAV RADIO

The desired NAV radio can be selected using the CDI

softkey located on the PFD. The three navigation modes

that can be selected with the CDI softkey are as follows:

• VOR1 (or LOC1) – If NAV1 is selected as the NAV

mode, a

single green arrow labeled either ‘VOR1’

or ‘LOC1’ is displayed on the HSI and the active

NAV1 frequency is displayed in green.

• VOR2 (or LOC2) – If NAV2 is selected as the NAV

mode, a double green arrow labeled either ‘VOR2’

or ‘LOC2’ is displayed on the HSI and the active

NAV2 frequency is displayed in green.

• GPS – If GPS mode is selected, a single magenta

arrow appears on the HSI and neither NAV radio

is selected.

NOTE: In GPS mode, both active NAV frequencies

are displayed in white.

NOTE: When a VOR signal is received, the cor-

responding VOR/LOC name identiﬁer is displayed

to the right of the associated active NAV fre-

quency.

Figure 4.3.6 Selecting a NAV Radio

NAV radio selection is

performed via the

CDI

softkey.