User Guide

190-00443-01 Rev. A Garmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R

3-49

REVERSIONARY MODE

3.7 REVERSIONARY MODE

The PFD is designed to enter reversionary (backup)

mode based on automatic fault monitoring and detec

tion, internal switching. Reversionary mode can also be

activated by manually pressing a dedicated DISPLAY

BACKUP button at the bottom of the Audio Panel (refer

to Audio Panel Pilot’s Guide). In reversionary mode, the

CDUs are re-conﬁgured to present the PFD symbology to-

gether with the engine parameters (engine parameters are

incorporated on the left side of the display).

Figure 3.7.1 PFD Reversionary Mode

Transition for the pilot is straightforward since PFD

parameters are presented in the same format as that prior

to the re-conﬁguration. In the event of a display failure,

the pilot loses one NAV, one COM and GPS as displayed

below:

• PFD failure – NAV1, COM1 and GPS1 are lost

• MFD failure – NAV2, COM2 and GPS2 are lost