User Guide

ManualsBrandsGarmin ManualsOtherG1000 MOONEY PRIMARYFLIGHTDISPLAY PILOTS GUIDE M20M M20R

190-00443-01 Rev. AGarmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R

3-44

SUPPLEMENTAL FLIGHT DATA

Change Fields

Change Fields allows the pilot to select the desired

data items to be displayed on the Flight Plan window. The

user-selectable data ﬁelds can be changed to display the

following information:

• Cumulative Distance (CUM)

• Distance (DIS)

• Desired Track (DTK)

• Enroute Safe Altitude (ESA)

• Estimated Time of Arrival (ETA)

• Estimated Time Enroute (ETE)

Figure 3.6.24 Change Fields on Flight Plan

To change a data ﬁeld on the Flight Plan

window:

1. From the Flight Plan window, press the

key to display the page menu options.

2. Turn the

FMS

knob to highlight ‘Change Fields’,

then press the

ENT

key. The cursor ﬂashes on

one of the data ﬁelds.

3. Turn the

large FMS

knob to highlight the desired

ﬁeld to be changed.

4. Turn the

small FMS

knob to display a window

with optional data items.

5. Turn the

FMS

knob to select the desired data

item, then press the

ENT

key. Press the

small

FMS

knob to remove the cursor.

Restore Defaults

Restore Defaults restores all data ﬁelds to the factory

default settings.

To restore factory default settings for data

ﬁelds on the Flight Plan window:

1. From the Flight Plan window, press the

key to display the page menu options.

2. Turn the

FMS

knob to highlight ‘Restore

Defaults’, then press the

ENT

key.

Procedures Window

The Procedures window is enabled and disabled by

pressing the PROC key. The following options are avail-

able from the Procedures window:

• Activate Vector-To-Final

• Activate Approach

• Select Approach

• Select Arrival

• Select Departure

Figure 3.6.25 Procedures Window