User Guide

190-00443-01 Rev. A Garmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R
3-43
SUPPLEMENTAL FLIGHT DATA
Remove Departure
Remove Departure deletes the current standard instru-
ment departure (SID) from the active flight plan.
Remove Arrival
Remove Arrival deletes the current standard terminal
arrival route (STAR) from the active flight plan.
Remove Approach
Remove Approach deletes the currently selected ap
-
proach from the active flight plan.
To remove a departure, an arrival, or an
approach from a direct-to or active flight
plan:
1. From the Flight Plan window, press the
MENU
key to display the page menu options.
2. Turn the
FMS knob to highlight ‘Remove Depar-
ture’, ‘Remove Arrival’, or ‘Remove Approach’,
then press the
ENT key. A confirmation window
appears listing the procedure that is about to
be removed, with ‘OK’ highlighted. Press the
ENT key to remove the procedure.
3. To cancel, turn the
large FMS knob to highlight
‘CANCEL’, then press the ENT key.
Closest Point of FPL
Closest Point of FPL calculates the bearing and clos
-
est distance at which a flight plan passes from a reference
waypoint. It may also be used to create a new user way-
point along the flight plan at the location closest to a cho-
sen reference waypoint.
Figure 3.6.23 Closest Point of FPL Window
To determine the closest point along the
active flight plan to a selected waypoint:
1. From the Flight Plan window, press the
MENU
key to display the page menu options.
2. Turn the
FMS knob to highlight ‘Closest Point
of FPL’, then press the ENT key. A window
appears with the reference waypoint field
highlighted.
3. Turn the
FMS knobs to enter the identifier of the
reference waypoint, then press the
ENT key. The
G1000 displays the bearing (BRG) and distance
(DIS) to the closest point along the flight plan
from the selected reference waypoint.
4. To create a user waypoint at this location and
add it to the flight plan, press the
ENT key. The
name for the new user waypoint is derived from
the identifier or the reference waypoint.