User Guide

ManualsBrandsGarmin ManualsOtherG1000 MOONEY PRIMARYFLIGHTDISPLAY PILOTS GUIDE M20M M20R

190-00443-01 Rev. A Garmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R

3-41

SUPPLEMENTAL FLIGHT DATA

Load Departure

Load departure allows the pilot to select a published

standard instrument departure (SID) for the departure

airport, or replace the current departure with a new selec

tion. When using a direct-to, the G1000 uses the nearest

airport as a reference when displaying available depar

tures.

NOTE

The PROC key can also be used to load a

departure, an approach, or an arrival.

To select a departure for the departure

airport:

1. From the Flight Plan window , press the

key to display the page menu options.

2. Turn the

FMS

knob to highlight ‘Load Depar-

ture’, then press the

ENT

key. A window

appears listing the available departures for the

departure airport.

3. Turn the

FMS

knob to select the desired depar-

ture, then press the

ENT

key.

NOTE: This runway window is not displayed for

every departure. ‘ALL’ may appear in the runway

ﬁeld, indicating that the departure procedure

applies to all runways. For airports with parallel

runways, ‘B’ may appear at the end of the runway

designation to indicate that the departure pro-

cedure applies to both runways.

4. A window may appear listing runways for the

departure. Turn the

FMS

knob to select the

desired runway, then press the

ENT

key. The

transition window is now displayed.

5. Turn the

FMS

knob to select the desired transi-

tion waypoint, then press the

ENT

key. With

‘LOAD?’ highlighted, press the

ENT

key.

Figure 3.6.19 Departure

Figure 3.6.20 Departure Runway

Figure 3.6.21 Departure Transition

Figure 3.6.22 Select Departure Window