User Guide

ManualsBrandsGarmin ManualsOtherG1000 MOONEY PRIMARYFLIGHTDISPLAY PILOTS GUIDE M20M M20R

190-00443-01 Rev. AGarmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R

3-36

SUPPLEMENTAL FLIGHT DATA

To view information about an airport:

1. Press the

NRST

softkey to display a list of the

Nearest Airports.

2. Turn the

FMS

knob to select the desired airport

and press the

ENT

key.

3. The airport information is displayed with

‘BACK’ highlighted at the bottom of the

window. When ﬁnished viewing the airport

information, press the

ENT

key to return to the

nearest airports list.

Figure 3.6.11 Airport Information Window

To select an airport by the airport identiﬁer,

location, and name ﬁelds from the Airport

Information window:

1. From the Nearest Airport window, turn the

large FMS

knob to highlight the desired ﬁeld.

2. Turn the

FMS

knobs to select the desired loca-

tion, then press the

ENT

key.

3. Turn the

large FMS

knob to highlight ‘BACK’,

then press the

ENT

key.

To activate a Direct-to from the Nearest

Airports window:

1. From the Nearest Airports window, turn the

large FMS

knob to highlight the desired airport,

then press the

Direct-to

key. The Direct-to

window appears. Press the

ENT

key twice to

activate.

To activate a Direct-to from the Airport

Information window:

1. From the Airport Information window, press

the

Direct-to

key.

2. Press the

ENT

key twice to activate.

To select a COM frequency:

1. From the Nearest Airports window, turn the

large FMS

knob to highlight the desired fre-

quency, then press the

ENT

key. The frequency

is tuned in the standby COM frequency ﬁeld

selected by the tuning box.

Direct-to Window

The Direct-to window is enabled and disabled by

pressing the Direct-to key. The currently selected way

point displays the following information:

• Identiﬁer

• Waypoint symbol

• Waypoint location

• Facility name

• Flight plan waypoint list

• Nearest waypoint List

• Bearing to waypoint

• Distance from waypoint

• Latitude/longitude

• Course to selected waypoint

Direct-to Navigation

Selection of a waypoint for Direct-to navigation may be

done in the following ways:

• By specifying the identiﬁer, waypoint location or

facility name

• By selecting from a list of waypoints in the active

ﬂight plan

• By selecting from a list of the 25 nearest airports