User Guide

190-00443-01 Rev. AGarmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R
3-34
SUPPLEMENTAL FLIGHT DATA
Generic Timer
The Generic Timer contains hours, minutes and sec-
onds fields, timer direction (count UP or DOWN), and
timer status START, STOP or RESET.
To change the Generic Timer:
1. Press the
TMR/REF softkey, then turn the large
FMS knob to select the time field (hh/mm/ss).
Turn the FMS knobs to set the desired time,
then press the
ENT key. The UP/DOWN field is
now highlighted.
2. Turn the
small FMS knob to display the UP/
DOWN window. Turn the FMS knob to select
‘UP’ or ‘DOWN’, then press the
ENT key.
‘START?’ is now highlighted.
3. Press the
ENT key to START, STOP, or RESET the
timer (if the timer is counting DOWN, it must
be reset manually). Press the
CLR key or the
TMR/REF softkey to remove the window.
Figure 3.6.7 Timer Status Prompts
Vspeeds and Vspeed Bug Status
The Vspeeds can be changed and the Vspeed bugs can
be turned ON or OFF from the Timer/References window.
By default, all Vspeed values are reset and all Vspeed bugs
are turned OFF when power is cycled.
Figure 3.6.8 Timer/References Window
To change Vspeeds and turn the Vspeed
bug ON or OFF:
1. Press the
TMR/REF softkey, then turn the large
FMS knob to highlight the field of the Vspeed
to be changed.
2. Turn the
small FMS knob to select the desired
speed and press the
ENT key (when a speed has
been changed, an asterisk appears next to the
speed). The ON/OFF field is now highlighted.
3. To change each setting individually, turn the
small FMS knob in the direction of the green
arrowhead.
4. All Vspeed references can be changed simulta
-
neously by pressing the
MENU key and select
‘All References ON’ or ‘All References OFF’, then
press the ENT key.
To restore all defaults:
1. From the Timer/References window, press the
MENU
key, then turn the FMS knob to highlight
‘Restore Defaults’ and press the
ENT key. Press
the
TMR/REF softkey to remove the window.