User Guide

190-00443-01 Rev. A Garmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R
3-33
SUPPLEMENTAL FLIGHT DATA
AUXILIARY WINDOW KEYS
The main keys which are used in association with the
PFD Auxiliary window operations are listed below:
• DIRECT-TO – Activates the direct-to func-
tion, and allows the user to enter a destination
waypoint and establishes a direct course to the
selected destination (specified by identifier chosen
from the active route).
• FPL – Displays the active Flight Plan Page for cre-
ating and editing the active flight plan or access-
ing stored flight plans.
• CLR – Erases information, cancels an entry, or
removes page menus.
• MENU – Displays a context-sensitive list of
options. This option list allows the user to access
additional features or make setting changes which
relate to certain pages.
• PROC – Selects approaches, departures and arriv-
als for the flight plan. When using a flight plan,
available procedures for departure and/or arrival
airport are offered automatically. If a flight plan
is not used, the desired airport, then the desired
procedure may be selected. This key selects IFR
departure procedures (SIDs), arrival procedures
(STARs) and approaches (SIAPs) from the data-
base and loads them into the active flight plan.
• ENT – Accepts a menu selection or data entry.
This key is used to approve an operation or
complete data entry. It is also used to confirm
information.
NOTE: Pressing the softkeys does not display a
menu or sub-menu.
AUXILIARY WINDOWS
The lower right area of the PFD is a shared area that, at
any one time, can present the following windows:
• TIMER/REFERENCES
• NEAREST
• DIRECT-TO
• FLIGHT PLAN
• PROCEDURES
Timer/References Window
The Timer/References window is enabled and disabled
by pressing the
TMR/REF softkey. The following Vspeeds
and Vspeed bugs can be set using the Timer/References
window:
• Generic timer
• Timer direction (count UP or DOWN)
• START, STOP or RESET
• Best glide speed reference
• Best glide speed bug (ON, OFF)
• Rotation speed reference (Vr)
• Vr bug (ON, OFF)
• Best angle-of-climb speed reference (Vx)
• Vx bug (ON, OFF)
• Best rate-of-climb speed reference (Vy)
• Vy bug (ON, OFF)
• Flight ID
NOTE: Refer to the Aircraft Flight Manual Supple-
ment (AFMS) for limitations.