User Guide

190-00443-01 Rev. AGarmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R
3-32
SUPPLEMENTAL FLIGHT DATA
To enable/disable Stormscope (optional),
NEXRAD (optional), or XM lightning
(optional) data:
1. Press the
INSET softkey. Press the STRMSCP
(optional),
NEXRAD (optional), or XM LTNG
(optional) softkey to display weather informa
-
tion.
2. Press the
STRMSCP, NEXRAD, or XM LTNG soft-
key again to remove the weather information
from the map.
NOTE: Refer to the G1000 Optional Equipment
Pilot’s Guide for more details about the weather
options.
To pan the map:
NOTE: The joystick on the PFD operates inde-
pendently from the one on the MFD.
1. Push in the joystick to display the panning
pointer. This allows the pilot to move the map
beyond its current limits without adjusting the
range.
2. Push in and move the
joystick to pan the map
in the general direction of the desired location.
When the pointer is placed on an object, the
name of the object is highlighted for approxi
-
mately 4 seconds (even if the name was not
originally displayed on the map). This feature
applies to everything displayed on the map
except for route lines.
3. Push in the
joystick again to cancel the panning
function and return to the present position on
the map.
NOTE: The airspace boundary stays highlighted
for approximately 4 seconds before returning to
normal shading.
WORKING WITH MENUS
Much of the G1000 operation is accomplished us-
ing a menu interface. The G1000 has a bezel-mounted
dedicated MENU key that, when pressed, displays a con-
text-sensitive list of options. This option list allows the
pilot to access additional features or make setting changes
which specifically relate to the currently displayed win
-
dow. There is no all-encompassing menu. Some menus
provide access to additional sub-menus that are in turn
used to view, edit, select and review options.
Once the Page Menu window is displayed, turn the
FMS knob to scroll through a list of available options (a
scroll bar always appears to the right of the window when
the option list is longer than the window) and press the
ENT key to select the desired option. The CLR key may
be pressed to remove the menu and cancel the opera
-
tion. Pressing the
FMS knob also removes the displayed
menu.
Figure 3.6.5 Page Menu – No Options With NRST Window Displayed
Figure 3.6.6 Page Menu – Options With FPL Window Displayed
NOTE: Pressing the softkeys does not display a
menu or sub-menu.