User Guide

190-00443-01 Rev. AGarmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R
3-8
SOFTKEYS
STD BARO – Press to set the barometric pressure
to 29.92 inches of mercury (1013 hPa by
pressing the METRIC softkey).
BACK – Press to return to the previous level
softkeys.
CDI – Press to change navigation mode on the CDI
between GPS, NAV1 and NAV2.
ADF/DME – Press to display the ADF/DME Tuning
window.
OBS – Press to select OBS mode on the CDI when
navigating by GPS.
XPDR – Press to display the transponder mode selec-
tion softkeys.
STBY – Press to select standby mode.
ON – Press to select Mode A.
ALT – Press to select altitude mode (Mode C).
VFR – Press to automatically enter the VFR code
(1200 in the U.S.A. only).
CODE – Press to display transponder code selection
softkeys 0-7.
0 through 7 – Press numbers to enter code.
IDENT – Press to provide special aircraft
position identification to Air Traffic Control
(ATC).
BKSP – Press to remove numbers entered one
at a time.
BACK – Press to return to the previous level
softkeys.
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
BACK – Press to return to the previous level
softkeys.
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
TMR/REF – Press to display the Timer/References
window.
NRST – Press to display the Nearest Airports
window.
ALERTS – Press to display the Alerts window.