User Guide

190-00443-00 Rev. A Garmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R
3-33
SUPPLEMENTAL FLIGHT DATA
Vspeeds and Vspeed Bug Status
Vspeed values for the aircraft can be found in the Air-
craft Flight Manual (AFM). The Vspeeds can be changed
and the Vspeed bug can be turned ON or OFF.
Figure 3.6.8 Timer/References Window
To change Vspeeds and turn the Vspeed
bug ON or OFF:
1. Press the
TMR/REF
softkey, then turn the
large
FMS
knob to highlight the field of the Vspeed
to be changed.
2. Turn the
small FMS
knob to select the desired
speed and press the
ENT
key (when a speed has
been changed, an asterisk appears next to the
speed). The ON/OFF field is now highlighted.
3. To change each setting individually, turn the
small FMS
knob to display the selection window.
Turn the
FMS
knob to select the desired setting
and press the
ENT
key.
4. All Vspeed references can be changed simulta
-
neously by pressing the
MENU
key and selecting
All References ON’ or All References OFF’, then
by pressing the
ENT
key.
To restore all defaults:
1. From the Timer/References window, press the
MENU
key, then turn the
FMS
knob to highlight
‘Restore Defaults’ and press the
ENT
key. Press
the
TMR/REF
softkey to remove the window.
NOTE: Default settings are automatically
restored when power is cycled.
Nearest Airports Window
The Nearest Airports window is enabled and disabled
by pressing the NRST softkey. The Nearest Airports win-
dow displays the 25 nearest airports with the following
information:
Identifier
Airport Symbol
Bearing to
Distance from
Best approach available
Primary communications frequency
Length of longest hard surface runway (or soft
surface, if no hard surface runway exists)
NOTE: From the Nearest Airports window, infor-
mation for a selected airport can be viewed, the
active primary communications frequency can
be selected, and direct-to navigation can be
activated.
Figure 3.6.9 Nearest Airports Window
Primary
COM
Frequency
Identifier
Airport Symbol
Bearing
To
Distance
Best
Approach
Available
Runway
Length