User Guide

ManualsBrandsGarmin ManualsOtherG1000 MOONEY PRIMARYFLIGHTDISPLAY PILOTS GUIDE M20

190-00443-00 Rev. AGarmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R

3-32

SUPPLEMENTAL FLIGHT DATA

AUXILIARY WINDOWS

The lower right area of the PFD is a shared area that, at

any one time, can present the following windows:

• TIMER/REFERENCES

• NEAREST

• DIRECT-TO

• FLIGHT PLAN

• PROCEDURES

Timer/References Window

The Timer/References window is enabled and disabled

by pressing the

TMR/REF softkey. The following Vspeeds

and Vspeed bugs can be set using the Timer/References

window:

• Generic timer

• Timer direction (count UP or DOWN)

• START, STOP or RESET

• Best glide speed reference

• Best glide speed bug (ON, OFF)

• Rotation speed reference (Vr)

• Vr bug (ON, OFF)

• Best angle-of-climb speed reference (Vx)

• Vx bug (ON, OFF)

• Best rate-of-climb speed reference (Vy)

• Vy bug (ON, OFF)

NOTE: Refer to the Aircraft Flight Manual Supple-

ment (AFMS) for limitations.

Generic Timer

The Generic Timer contains hours, minutes and sec-

onds ﬁelds, timer direction (count UP or DOWN), and

timer status START, STOP or RESET.

To change the Generic Timer:

1. Press the

TMR/REF

softkey, then turn the

large

FMS

knob to select the time ﬁeld (hh/mm/ss).

Turn the

FMS

knobs to set the desired time,

then press the

ENT

key. The UP/DOWN ﬁeld is

now highlighted.

2. Turn the

small FMS

knob to display the UP/

DOWN window. Turn the

FMS

knob to select

‘UP’ or ‘DOWN’, then press the

ENT

key.

‘START?’ is now highlighted.

3. Press the

ENT

key to START, STOP, or RESET the

timer (if the timer is counting DOWN, it must

be reset manually). Press the

CLR

key or the

TMR/REF

softkey to remove the window.

Figure 3.6.7 Timer Status Prompts