User Guide

190-00443-00 Rev. AGarmin G1000 PFD Pilot’s Guide for Mooney M20M & M20R
3-30
SUPPLEMENTAL FLIGHT DATA
To enable/disable lightning data (optional):
1. Press the
INSET softkey. Press the LTNG softkey
to display WX-500 Stormscope data on the
map within a 200 nm radius of the aircraft.
A lightning bolt icon appears above the map
range on the map.
2. Press the
LTNG softkey again to remove light-
ning data from the map.
NOTE: Refer to the Multi Function Display Pilot’s
Guide for more details about lightning data.
To pan the map:
NOTE: The joystick on the PFD operates inde-
pendently from the one on the MFD.
1. Push in the joystick to display the panning
pointer. This allows the pilot to move the map
beyond its current limits without adjusting the
range.
2. Push in and move the
joystick to pan the map
in the general direction of the desired location.
When the pointer is placed on an object, the name
of the object is highlighted for approximately 4
seconds (even if the name was not originally
displayed on the map). This feature applies to
everything displayed on the map except for route
lines.
3. Push in the
joystick again to cancel the panning
function and return to the present position on
the map.
NOTE: The airspace boundary stays highlighted
for approximately 4 seconds before returning to
normal shading.