User Guide

5-106 190-00647-00 Rev. A
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
GPS NAVIGATION
3) Press the ENT Key. The ARRIVAL window is displayed on the ‘PROC – ARRIVAL LOADING’ Page.
4) Select an arrival.
5) Press the ENT Key. The TRANSITION window is displayed.
6) Select a transition.
7) Press the ENT Key. The RUNWAY window may be displayed. If so, select a runway.
8) Press the ENT Key.
9) With ‘LOAD’ highlighted, press the ENT Key. The arrival procedure is displayed as part of the overall flight plan
and is placed in front of the enroute flight plan.
OR:
1) From the Active Flight Plan page, press the MENU Softkey.
2) Highlight ‘Load Arrival’.
3) Press the E NT Key. The ARRIVAL window is displayed on the ‘PROC – ARRIVAL LOADING’ Page.
4) Select an arrival.
5) Press the E NT Key. The TRANSITION window is displayed.
6) Select a transition.
7) Press the E NT Key. The RUNWAY window may be displayed. If so, select a runway.
8) Press the E NT Key.
9) With ‘LOAD’ highlighted, press the ENT Key. The arrival procedure is displayed as part of the overall flight plan
and is placed in front of the enroute flight plan.
OR:
1) Select the Arrival Information Page.
2) Press the M ENU Key.
3) Highlight ‘Load Arrival’.
4) Press the E NT Key. The Active Flight Plan Page is displayed. The arrival procedure is displayed as part of the
overall flight plan and is placed after the enroute flight plan.
View an arrival:
1) Select the Departure Information Page.
2) Press the M ENU Key.
3) Highlight ‘View Arrival’.
4) Press the E NT Key. The Arrival Information Page is displayed.