User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R 190-00448-00 Rev. A
8-96
PROCEDURES
13. As the pilot approaches the MAP, a waypoint
message ‘ARRIVING AT WAYPOINT’ appears.
14. Upon crossing the MAP, ‘SUSP’ appears
above the
SUSP softkey, indicating that auto-
matic sequencing of approach waypoints is
suspended at the MAP. A ‘FROM’ indication
is present on the TO/FROM arrow, however
course guidance along the final approach
course continues. Do NOT follow this extended
course. Follow the published missed approach
procedure using the
OBS softkey to initiate the
missed approach sequence.
Figure 8.8.14 Flying the Vectors Approach
Reproduced with permission of Jeppesen Sanderson, Inc. Not to be used for navigation.