User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-85
PROCEDURES
14. Upon crossing the MAP, ‘SUSP’ appears on the
HSI and directly above the SUSP softkey, indi-
cating that automatic sequencing of approach
waypoints is suspended at the MAP. A ‘FROM’
indication is displayed on the CDI, however
course guidance along the final approach
course continues. If a missed approach is
required, use the
SUSP softkey to initiate the
missed approach sequence.
Figure 8.8.9 Flying a Holding Pattern
Reproduced with permission of Jeppesen Sanderson, Inc. Not to be used for navigation.
NOTE: Remember do not press the OBS softkey
until you are ready to make the turn.