User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-71
PROCEDURES
8.8 PROCEDURES
ARRIVALS AND DEPARTURES
Based upon the active flight plan or Direct-to destina-
tion, the Procedures Page provides direct access to ap-
proaches, departures and arrivals. The Procedures Page
is displayed by pressing the PROC key.
Figure 8.8.1 Procedures Page
NOTE: Pilots should be familiar with section
1-1-20 of the Aeronautical Information Manual
(AIM) regarding the use of GPS.
To select a departure:
1. Press the
PROC key. Turn the large FMS knob
to highlight ‘Select Departure’ and press the
ENT key. The departure procedure window
appears.
2. Turn the
FMS knob to select the desired
departure and press the
ENT key. The transi-
tion window appears.
3. Turn the
FMS knob to select the desired
transition and press the ENT key. ‘LOAD?’ is
highlighted. Press the
ENT key.
NOTE: Vector departures are not part of the
avation database.
To select an arrival:
1. Press the
PROC key. Turn the large FMS knob
to highlight ‘Select Arrival’ and press the
ENT
key. The arrival procedure window appears.
2. Turn the
FMS knob to enter the desired arrival
and press the ENT key. The transition window
appears.
NOTE: The approach vectors option assumes
the pilot will receive vectors to the final course
segment of the approach and will provide navi
-
gation guidance on the final approach segment
and extension only.
3. Turn the FMS knob to select the desired
transition and press the
ENT key. ‘LOAD?’ is
highlighted. Press the ENT key. Review the
flight plan for accuracy. If the destination is
listed twice, remove the first one if the arrival
is filed as part of the flight plan. If the arrival
is received enroute, highlight the first point of
the arrival, press direct-to, and enter when the
clearance is received. Sequencing is automatic
thereafter.