User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R 190-00448-00 Rev. A
8-68
FLIGHT PLANS
Point-n-Shoot Flight Plan Creation Feature
The “Point-n-Shoot” flight plan creation feature is
activated using the Navigation Map Page and the Active
Flight Plan Page.
1. Push the Joystick to turn the map cursor on.
2. Select the Active Flight Plan Page and press
the
FMS knob to highlight the list of waypoints.
Waypoints will be inserted ABOVE the high-
lighted row if the cursor is on. Waypoints will
be inserted at the END of the flight plan if the
cursor is off.
3. To insert waypoints, use the map cursor to
point at the desired waypoint (it will become
visually enhanced when it is properly pointed
to), and press the
LD WPT softkey. Existing user
waypoints are inserted in the same manner.
4. If the selected waypoint is not a Jeppesen
waypoint (Airport or Navaid) or user waypoint,
the G1000 creates a user waypoint (beginning
with ‘USR000’) at the point and inserts it into
the flight plan.
5. The pilot can also create and insert a user
waypoint by pointing at a blank spot on the
nav map and pressing ‘LD WPT’. This creates
a user waypoint at the map cursor and inserts
it into the flight plan.