User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-59
FLIGHT PLANS
Load Arrival
‘Load Arrival’ allows a published standard terminal ar-
rival route (STAR) for the destination airport to be loaded
into a flight plan. It also replaces the current arrival with
a new selection. An arrival can also be loaded using the
PROC key or by pressing the LD STAR softkey.
To select an arrival for a Direct-to or flight
plan destination airport:
1. From the Active Flight Plan Page, press the
MENU key to display the Active Flight Plan
Page options.
2. Highlight the ‘Load Arrival’ option and press
the ENT key.
3. A window is displayed listing the available
arrivals for the destination airport. Turn either
the small or
large FMS knob to select the
desired arrival and press the
ENT key.
4. A second window is displayed listing available
transitions for the arrival. Turn either the small
or
large FMS knob to highlight the desired tran-
sition waypoint and press the
ENT key.
5. A third window is displayed listing available
arrival runways. Turn either the small or
large
FMS knob to highlight the desired runway and
press the ENT key.
6. With ‘LOAD’ highlighted, press the
ENT key.
The arrival flight plan is displayed as part of
the overall flight plan and is placed after the
enroute flight plan.
Figure 8.7.9 Selecting an Arrival