User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-3
INTRODUCTION
MFD SOFTKEYS
The MFD softkeys are located below the display glass
and provide control over flight management functions
which includes GPS and NAV management, engine and
airframe monitoring, terrain, weather, and traffic. Figure
8.1.2 shows an MFD flowchart identifying what functions
are available via the softkey labels.
The MFD softkeys perform the following functions:
ENGINE – Pressing the ENGINE softkey makes
available the LEAN and SYSTEM softkeys which
in turn access the Lean Page and the System Page,
respectively.
MAP – pressing the MAP softkey enables the follow-
ing softkeys:
TRAFFIC – pressing the TRAFFIC softkey
displays/removes Traffic on the Navigation
Map.
TOPO – pressing the TOPO softkey displays
or removes topographic information on the
Navigation Map.
TERRAIN – pressing the TERRAIN softkey
displays/removes terrain and obstacle data
on the Navigation Map.
LTNG – Press to display lightning data on the
Navigation Map Page (within a 200 nm
radius of the aircraft).
BACK – pressing the BACK softkey displays
the ENGINE and MAP top level softkeys.
DCLTR (declutter) – pressing the DCLTR softkey
removes map information in three levels.