User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-15
NAVIGATION MAP PAGE
Displaying Terrain Data on the Navigation Map
Page
Terrain data can be displayed on the Naviga-
tion Map Page by pressing the TERRAIN softkey. Ter-
rain symbology (mountain icons) appear next to the
map range in the bottom right corner of the page in-
dicating the presence of terrain data on the map. See
the Terrain Proximity Page section for a terrain color
interpretation chart.
To display terrain data on the Navigation
Map Page:
1. Press the
MAP softkey.
2. Press the
TERRAIN softkey. Press the TERRAIN
softkey again to remove terrain data from the
Navigation Map Page.
Figure 8.2.5 TRAFFIC, TOPO TERRAIN, and LTNG Softkeys
Displaying Traffic on the Navigation Map Page
Pressing the TRAFFIC softkey displays Traffic Informa-
tion Service (TIS) traffic on the Navigation Map Page. TIS
is a ground-based service providing relative location of all
ATCRBS Mode-A and Mode-C transponder equipped air-
craft within a specified service volume.
The TIS ground sensor uses real time track reports to
generate traffic notification. Surveillance data includes
all transponder-equipped aircraft within the coverage
volume. The G1000 displays up to eight traffic targets
within a 7.5 nautical mile radius, from 3,000 feet below to
3,500 feet above the requesting aircraft. See Appendix E
for a full description of TIS. A traffic symbol appears next
to the map range in the bottom right corner of the display
indicating the presence of traffic data on the map.
To display traffic on the Navigation Map
Page:
1. Press the
MAP softkey.
2. Press the
TRAFFIC softkey. Press the
TRAFFIC softkey again to remove traffic from the
Navigation Map Page.
NOTE: Traffic and terrain data can also be
displayed by using the ‘On/Off’ Navigation Map
Page option. See the Navigation Map Page setup
section for details.
