User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-149
AUXILIARY PAGE GROUP
To change COM channel spacing:
1. Select the System Setup Page.
2. Press the
FMS knob momentarily, to activate
the flashing cursor.
3. Turn the
large FMS knob to highlight the
‘CHANNEL SPACING’ field.
4. Turn the
small or large FMS knob to select the
desired spacing and press the ENT key.
Nearest APT
Nearest Airport defines the minimum runway length
and surface type used when determining the nine nearest
airports to display on the Nearest Airport Page. A mini-
mum runway length and/or surface type can be entered to
prevent airports with small runways, or runways that are
not of appropriate surface, from being displayed. The de-
fault settings are ‘0 feet (or meters)’ for runway length and
“any” for runway surface type. The Nearest Airport section
of the System Setup page displays the following data:
• Nearest airport surface matching criteria (any,
hard only, hard/soft, water)
• Nearest airport minimum length matching criteria
To select Nearest airport surface matching
criteria (any, hard only, hard/soft, water):
1. Select the System Setup Page.
2. Press the
FMS knob momentarily, to activate
the flashing cursor.
3. Turn the
large FMS knob to highlight ‘RNWY
SURFACE’ field in the ‘NEAREST APT’ box.
4. Turn the
small FMS knob to display the options
list for the selected item.
5. Turn the
small or large FMS knob to highlight
the new selection (any, hard only, hard/soft,
water). Press the
ENT key.
To select Nearest airport
minimum runway
length matching criteria:
1. Select the System Setup Page.
2. Press the
FMS knob momentarily, to activate
the flashing cursor.
3. Turn the
large FMS knob to highlight ‘MIN
LENGTH’ field in the ‘NEAREST APT’ box.
4. Turn the
small FMS knob to display the length
field.
5. Turn the
small and large FMS knobs to enter a
runway length (zero to 99,999 feet).
6. Press the
ENT key.