User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-147
AUXILIARY PAGE GROUP
Audio Alerts
The Audio Alert section of the System Setup Page
gives you the option of selecting a male or female voice
for audio alerts.
To change the audio alert voice:
1. Select the System Setup Page.
2. Press the
FMS knob momentarily, to activate
the flashing cursor.
3. Turn the
large FMS knob to highlight the
desired ‘VOICE’ field in the ‘AUDIO ALERT’
box.
4. Turn the
small FMS knob to display the options
list for the voice.
5. Turn the
small or large FMS knob to highlight
male or female.
6. Press the
ENT key.
MFD Data Bar Fields
The MFD Nav Data Bar Fields section of the System
Setup Page displays the current configuration of the Nav
data (MFD) bar fields. The Nav Data Bar Fields section of
the System Setup Page allows you to configure the four
Nav data bar fields to the following values:
• Bearing (BRG)
• Distance (DIS)
• Desired Track (DTK)
• En Route Safe Altitude (ESA)
• Estimated Time of Arrival (ETA)
• Estimated Time En Route (ETE)
• Ground Speed (GS)
• Minimum Safe Altitude (MSA)
• Track Angle Error (TKE)
• Track (TRK)
• Vertical Speed Required (VSR)
• Crosstrack Error (XTK)
The default settings are:
• Field 1: Ground speed (GS)
• Field 2: Distance to next waypoint (DIS)
• Field 3: Estimated Time enroute (ETE)
• Field 4: Enroute Safe Altitude (ESA)
To change an MFD Data Bar Field:
1. Select the System Setup Page.
2. Press the
FMS knob momentarily, to activate
the flashing cursor.
3. Turn the
large FMS knob to highlight the
desired MFD data bar field.
4. Turn the
small FMS knob to display the options
list.
5. Turn the
small or large FMS knobs to highlight
the new selection.
6. Press the
ENT key.