User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R 190-00448-00 Rev. A

8-12

NAVIGATION MAP PAGE

Map Panning

Map panning moves the map beyond its current limits

without adjusting the map range. When the panning func-

tion is selected by pushing in the joystick, a panning ar-

row ﬂashes on the map display. A window also appears at

the top of the map display showing the latitude/longitude

position of the pointer, the bearing and distance to the

pointer from the aircraft’s present position, and the eleva-

tion of the land at the position of the pointer. When the

panning arrow crosses an airspace boundary, the bound-

ary is highlighted and airspace information is displayed at

the top of the display. The information includes the name

and class of airspace, the ceiling in feet expressed in Mean

Seal Level (MSL), and the ﬂoor in feet MSL.

NOTE: The airspace boundary stays highlighted

for approximately four seconds before returning

to normal shading.

To pan the map:

1. Push in the

joystick

to display the panning

arrow.

2. Push in and move the

joystick

in the general

direction of the desired destination to place

the panning arrow at the destination loca-

tion. When the panning arrow is placed on an

object, the name of the object is highlighted

(even if the name wasn’t originally displayed

on the map). This feature applies to everything

displayed on the map except route lines. When

any map feature or object is selected on the

map display, features or objects are displayed

in the box located at the top of the display.

From here, the pilot can designate the waypoint

as the Direct-to destination. When the

panning arrow crosses an airspace boundary,

the boundary is highlighted and airspace infor-

mation is displayed at the top of the display.

3. To remove the panning arrow and return to

the present position, push in the

joystick

