User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-131
AUXILIARY PAGE GROUP
To set the generic timer direction (up,
down):
1. Select the AUX UTILITY Page.
2. Press the
FMS knob. The ‘GENERIC’ timer field
is highlighted.
3. Turn the
small FMS knob to display the ‘UP/
DOWN’ window.
4. Turn the
small or large FMS knob to select ‘UP’
or ‘DOWN’ and press the ENT key.
To start, stop, or reset the generic timer:
1. Select the AUX UTILITY Page.
2. Press the
FMS knob. Turn the large FMS knob
to select the ‘START?’ Field.
3. Press the
ENT key to start, stop, or reset the
timer.
To set the generic timer value:
1. Select the AUX UTILITY Page.
2. Press the
FMS knob. Turn the large FMS knob
to select the time field (hh/mm/ss).
3. Turn the
small and large FMS knobs to set the
desired time and press the ENT key.
To set the flight timer starting criteria
(ground speed more then 30 knots, power
on):
1. Select the AUX UTILITY Page.
2. Press the
FMS knob. Turn the large FMS knob
to select the ‘FLIGHT’ field.
3. Turn the
small FMS knob to display the selection
window.
4. Turn the
small or large FMS knob to select either
PWR-ON or GS>30KT and press the ENT key.
To set the departure timer starting criteria
(ground speed more then 30 knots,
power
on):
1. Select the AUX UTILITY Page.
2. Press the
FMS knob. Turn the large FMS knob
to select the ‘DEPARTURE TIME’ field.
3. Turn the
small FMS knob to display the selection
window.
4. Turn the
small or large FMS knob to select either
PWR-ON or GS>30KT and press the ENT key.
To reset the flight timer:
1. Select the AUX UTILITY Page.
2. Press the
MENU key. Turn either the small or
large FMS
knob to select ‘Reset Flight Timer’.
3. Press the
ENT key.
To reset the departure timer:
1. Select the AUX UTILITY Page.
2. Press the
MENU key. Turn either the small or
large FMS knob to select ‘Reset Departure
Time’.
3. Press the
ENT key.