User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-9
NAVIGATION MAP PAGE
NAVIGATION MAP PAGE OPERATIONS
The following Navigation Map Page operations can be
performed:
• Changing the Map Orientation
• Clearing Lightning Data
• Selecting a Map Range
• Using the Auto Zoom Feature
• Identifying Aviation Map Data
• Decluttering the Map
• Panning the Map
• Displaying Topographic Information on the
Navigation Map Page
• Displaying Terrain Information on the Navigation
Map Page
• Displaying Traffic on the Navigation Map Page
• Displaying Lighting Data on the Navigation Map
Page
• Displaying Obstacles
• MFD Navigation Status Window
• Navigation Map Page Options Menu
Changing the Map Orientation
See the Navigation Map Page Menu section for instruc-
tions on how to change the map orientation.
Clearing Lightning Data
See the Navigation Map Page Menu section for in-
structions on how to clear lightning data from the map
display
NOTE: A complete list of available map datums
are given in Appendix D.
Selecting a Map Range
The Navigation Map Page can be set to 28 different
range settings from 500 feet to 2000 nautical miles. The
current range is indicated in the lower right corner of the
Navigation Map Page and represents the top-to-bottom
distance covered by the map. To change the map range
turn the joystick counter-clockwise to zoom in, turn it
clockwise to zoom out.
Map Range
Figure 8.2.2 Navigation Map Range
Using the Auto Zoom Feature
The auto zoom feature automatically adjusts the
map from an enroute range of 2000 nm through
each lower range, stopping at a range of 1.5 nm as
the aircraft approaches the destination waypoint.
See the Navigation Map Page Menu section for in-
structions on enabling/disabling the auto zoom
feature.
