User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R 190-00448-00 Rev. A
8-106
WAYPOINT PAGE GROUP
APPROACH INFORMATION PAGE (APR)
The Approach Information Page shows the available
approach procedures for the selected airport. Where mul-
tiple initial approach fixes (IAFs) and feeder routes are
available, that information may also be displayed. A map
image provides a layout diagram for each approach and
transition. To display the Airport Approach Information
Page press the APR softkey.
To scroll through the available approaches
and transitions:
1. Press the
FMS knob to activate the cursor.
2. Turn the
large FMS knob to place the cursor on
the ‘APPROACH’ procedure name field.
3. Turn the
small FMS knob to display a window
of available approaches for the selected airport.
Continue turning the small or
large FMS knob
to select the desired approach.
4. Press the
ENT key. The cursor moves to the
transitions (TRANS) field.
5. Turn the
small FMS knob to display a window
of available transitions. Continue turning the
small or
large FMS knob to select the desired
transition or select ‘VECTORS’ for guidance
only along the final course segment of the
approach. Press the
ENT key. NOTE: the cursor
moves through the remaining fields but they
are not selectable.
6. To remove the flashing cursor, press the
FMS
knob.
NOTE: Not all approaches in the database are
approved for GPS use. As you select an approach,
a GPS designation to the right of the procedure
name indicates the procedure can be flown using
the GPS receiver. Some procedures do not have
this designation, meaning the GPS receiver may
be used for supplemental navigation guidance
only. ILS approaches, for example, must be
flown by tuning the NAV receiver to the proper
frequency and coupling the NAV receiver to the
HSI located on the PFD.
