User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-103
WAYPOINT PAGE GROUP
DEPARTURE INFORMATION PAGE (DP)
The Departure Information Page shows the available
Departure Procedures (DPs; also referred to as SIDs) for
the selected airport. Where multiple runways or transi-
tions are associated with the departure procedure, that
information can also be displayed. A map image provides
a layout diagram for each departure, runway and transi-
tion. To display the Departure Information Page press the
DP softkey.
To scroll through the available departures:
1. Press the
FMS knob to activate the cursor.
2. Turn the
large FMS knob to place the cursor on
the Departure procedure name field.
3. Turn the
small or large FMS knob to display a
window of available departures for the selected
airport. Continue turning the
small FMS knob
to select the desired departure.
4. Press the
ENT key. The cursor moves to the
runway field.
5. Turn the
small FMS knob to display a window of
available runways. Continue turning the small
FMS knob to select the desired runway.
6. Press the
ENT key. The cursor moves to the
Transitions field.
7. Turn the
small FMS knob to display a window
of available transitions. Continue turning the
small or large FMS knob to select the desired
transition.
8. Press the
ENT key. To remove the flashing
cursor, press the FMS knob.
NOTE: ‘ALL’ may appear in the runway field,
indicating the departure procedure applies to
all runways. For airports with parallel runways,
‘B’ may appear at the end of the runway designa-
tion to indicate the departure procedure applies
to both runways.
A departure can be loaded from the Departure Infor-
mation Page.
To load a departure procedure from the
Departure Information Page:
1. Select the desired departure, runway and transi
-
tion using the steps described previously.
2. Press
MENU to display the Airport Departure
Page Options.
3. Turn the
small or large FMS knob to highlight
‘LOAD DEPARTURE’ and press the
ENT key.
4. The Active Flight Plan Page is displayed. Press
the FPL key to return to the Airport Departure
Information Page.
Figure 8.9.6 Departure Page Menu
