User Guide

Garmin G1000 MFD Pilot’s Guide for the Mooney M20M & M20R190-00448-00 Rev. A
8-101
WAYPOINT PAGE GROUP
Airport Frequency Information Field
The Airport Frequency Information Field displays
radio frequencies and frequency types for the selected
airport, as well as sector and altitude restrictions (where
applicable). If the selected airport has a localizer-based
approach, the localizer frequency is also listed on the Air-
port Frequency Information Field. The Airport Frequency
Information Field may be used to quickly select and tune
a COM or NAV frequency.
To scroll through the frequency list and
tune to a desired frequency on the list:
1. Press the
FMS knob to activate the cursor.
2. Turn the small or
large FMS knob to scroll
through the list, placing the cursor on the
desired frequency. If there are more frequen-
cies in the list than can be displayed on the
screen, a scroll bar along the right-hand side
of the screen indicates where you are within
the list.
3. Press the
ENT key to place the selected fre-
quency in the standby field of the ‘COM’ or
‘NAV’ window.
4. To remove the flashing cursor, press the
FMS
knob.
Some listed frequencies may include designations for
limited usage, as follows:
• ‘TX’ – transmit only RX - receive only
• ‘PT’ – part time frequency
• ‘i’ – additional information exists, press the
ENT
key
If a listed frequency has sector or altitude restrictions,
the frequency is preceded by an info designation.
To view usage restrictions for a frequency:
1. Turn the
small or large FMS knob to place the
cursor on the info designated frequency.
2. Press the
ENT key to display the restriction
information.
3. To return to the Airport Frequency field, press
the ENT key.
Figure 8.9.4 Frequency Information Field