User Guide

Garmin G1000 EIS Pilot’s Guide for Mooney M20M & M20R 190-00447-00 Rev. A 7-8
ENGINE INDICATION SYSTEM
7.4 FLAP & TRIM INDICATIONS
Rudder Trim Position Indicator
The rudder trim position is displayed by a cyan (light
blue) triangle on a horizontal bar indicator. L (left) and R
(right) tick marks are shown. The white bar indicates the
takeoff setting range.
Figure 7.4.1 Rudder Trim
Elevator Trim Position Indicator
The elevator trim position is displayed by a cyan (light
blue) triangle pointer on a vertical bar indicator. UP and
DN tick marks are shown. The white bar indicates the
takeoff setting range.
Figure 7.4.2 Elevator Trim
Flap Position Indicator
The flap position indicator is collocated with the el-
evator trim position indicator. The flap indications are
displayed inside the box on top the elevator trim. The flap
positions are as follows:
• UP
• T/O (takeoff)
• DN (down)
Figure 7.4.3 Flaps – Up
Figure 7.4.4 Flaps – Takeoff
Figure 7.4.5 Flaps – Down
When the flaps are in transit and not within these rang-
es, ‘///’ is displayed inside the box.
Figure 7.4.6 Flaps – In Transit