User Guide

190-00592-00 Rev. AGarmin G1000 Pilot’s Guide for the Diamond DA403-20

NAV/COM

AUTO-TUNING UPON APPROACH

ACTIVATION (NAV FREQUENCIES)

NAV frequencies can be automatically loaded into the

NAV Frequency window upon approach activation, re-

gardless of the display unit being used.

NOTE: The primary NAV frequency becomes

auto-tuned upon loading of an approach.

To auto-tune a NAV frequency if the desired

approach is not already loaded:

1. Press the

PROC

key to open the Procedures

window.

2. Turn the

large FMS

knob to highlight the

‘SELECT APPROACH’ menu option and press

the

ENT

key.

3. Use both the

FMS

knob and the

ENT

key as

needed to select the desired airport, VOR/ILS

approach and transition.

4. Turn the

large FMS

knob to highlight either the

‘LOAD?’ or ‘ACTIVATE?’ prompt and press the

ENT

key. The primary NAV frequency for the

activated approach becomes loaded into the

standby ﬁeld of the selected NAV radio.

Figure 3-33 Selecting an Approach

Figure 3-34 Loading an Approach