User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40 190-00592-00 Rev. A2-42
PRIMARY FLIGHT DISPLAY
NOTE: The runway window is not displayed for
every departure. ‘ALL’ may appear in the runway
field, indicating that the departure procedure
applies to all runways. For airports with parallel
runways, ‘B’ may appear at the end of the runway
designation to indicate that the departure proce
-
dure applies to both runways.
5. Turn the FMS knob to select the desired transi-
tion, then press the
ENT key.
6. With ‘LOAD?’ highlighted, press the
ENT key.
Activate Approach
Activate Approach allows the pilot to activate the ap
-
proach when ready to begin navigating the approach
course (cleared for the approach).
To activate the approach for a direct-to or
flight plan destination airport:
1. From an active flight plan, press the
PROC key
to display the Procedures options window.
2. Turn the
large FMS knob to highlight ‘Activate
Approach’, then press the ENT key.
Activate Vector-To-Final
Activate Vector-To-Final allows the pilot to activate the
final course segment of the approach. This option assumes
that the pilot will receive vectors from ATC to the final ap
-
proach fix (FAF) and provides guidance to intercept the
final course, before reaching the FAF.
To activate the approach with vectors to
final:
1. From an active flight plan, press the
PROC key
to display the Procedures options window.
2. Turn the
FMS knob to highlight ‘Activate Vector-
To-Final’, then press the ENT key.