User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40190-00592-00 Rev. A
2-39
PRIMARY FLIGHT DISPLAY
Figure 2-62 Change Fields on Flight Plan
To change a data field on the Flight Plan
Window:
1. From the Flight Plan Window, press the
MENU
key to display the page menu options.
2. Turn the
FMS knob to highlight ‘Change Fields’,
then press the
ENT key. The cursor flashes on
one of the data fields.
3. Turn the
large FMS knob to highlight the field
to be changed.
4. Turn the
small FMS knob to display a window
with optional data items.
5. Turn the
FMS knob to select the desired data
item, then press the
ENT key. Press the small
FMS knob to remove the cursor.
Restore Defaults
Restore Defaults returns all data fields to the factory
default settings.
To restore factory default settings for data
fields on the Flight Plan Window:
1. From the Flight Plan Window, press the
MENU
key to display the page menu options.
2. Turn the
FMS knob to highlight ‘Restore
Defaults’, then press the
ENT key.
Procedures Window
The Procedures Window is enabled and disabled by
pressing the PROC key. The following options are avail-
able from the Procedures Window:
• Activate Vector-To-Final
• Activate Approach
• Select Approach
• Select Arrival
• Select Departure
Figure 2-63 Procedures Window
Select Approach
Select Approach allows the pilot to choose a published
instrument approach for the destination airport, or replace
the current approach with a new selection.
To select an approach for a direct-to or
flight plan destination airport:
1. From an active flight plan, press the
PROC key
to display the Procedures options window.
2. Turn the
large FMS knob to highlight ‘Select
Approach’, then press the
ENT key. A window
appears listing the available approaches for
the destination airport.