User Guide

ManualsBrandsGarmin ManualsOtherG1000 DIAMOND PILOTS GUIDE

Garmin G1000 Pilot’s Guide for the Diamond DA40 190-00592-00 Rev. A2-36

PRIMARY FLIGHT DISPLAY

Load Departure

Load Departure allows the pilot to select a published

standard instrument departure (SID) for the departure

airport, or replace the current departure with a new selec

tion. When using a direct-to, the G1000 uses the nearest

airport as a reference when displaying available depar

tures.

NOTE

The PROC key can also be used to load a

departure, an approach, or an arrival.

To select a departure for the departure

airport:

1. From the Flight Plan Window , press the

key to display the page menu options.

2. Turn the

FMS

knob to highlight ‘Load Depar-

ture’, then press the

ENT

key. A window

appears listing the available departures for the

departure airport.

Figure 2-57 Departure

3. Turn the

FMS

knob to select the desired depar-

ture, then press the

ENT

key.

4. A window may appear listing runways for the

departure. Turn the

FMS

knob to select the

desired runway, then press the

ENT

key. The

transition window is now displayed.

Figure 2-58 Departure Runway

NOTE: The runway window is not displayed for

every arrival. ‘ALL’ may appear in the runway

ﬁeld, indicating that the arrival procedure applies

to all runways. For airports with parallel runways,

‘B’ may appear at the end of the runway designa-

tion to indicate that the arrival procedure applies

to both runways.

5. Turn the

FMS

knob to select the desired transi-

tion waypoint, then press the

ENT

key.

Figure 2-59 Departure Transition

6. With ‘LOAD?’ highlighted, press the

ENT

key.

Figure 2-60 Select Departure Window