User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40 190-00592-00 Rev. A
7-74
MULTI FUNCTION DISPLAY
To select the NDB Information Page:
1. From any page, press and hold the
CLR key to
select the Navigation Map Page. You may skip
this step if you are already viewing any of the
Map Group pages.
2. Turn the
large FMS knob to select the ‘WPT’
page group. ‘WPT’ is displayed in the page
group icon located in the lower right corner
of the display.
3. Turn the
small FMS knob to select the NDB
Information Page.
To select a NDB by using an Identifier:
1. With the NDB Information Page displayed,
press the FMS knob to activate the cursor.
2. Turn the
small and large FMS knobs to enter
a name for the identifier and press
the ENT
key.
3. Press the
FMS knob to remove the flashing
cursor.
To select a NDB by using a Name:
1. With the NDB Information Page displayed,
press the FMS knob to activate the cursor.
2. Turn the
large FMS knobs to highlight the name
field
3. Turn the large and
small FMS knobs to enter
a name and press the ENT key.
4. Press the
FMS knob to remove the flashing
cursor.
To select a NDB by using the closest city:
1. With the NDB Information Page displayed,
press the FMS knob to activate the cursor.
2. Turn the
large FMS knobs to highlight the clos-
est city field
3. Turn the large and
small FMS knobs to enter
a city and press the ENT key.
4. Press the
FMS knob to remove the flashing
cursor.
NDB Information Page Options
The following NDB Information Page Options are
available by pressing the MENU key (with the NDB
Information Page displayed):
• ‘View Recent NDB List’ which allows you to view
the most recent NDB list.
To view the most recent NDB list:
1. Select the NDB Information Page and press
MENU to display the NDB Information Page
Options. ‘View Recent NDB List’ is high-
lighted.
2. Press the
ENT key. Turn the small FMS knob
to select an NDB from the list and press the
ENTER key. The selected NDB is now the active
user NDB.
Figure 7-58 NDB Page Menu