User Guide

Garmin G1000 Pilot’s Guide for the Diamond DA40 190-00592-00 Rev. A
7-2
MULTI FUNCTION DISPLAY
MFD SOFTKEYS
The MFD softkeys are located below the display screen
and provide control over flight management functions
including GPS Navigation and flight planning. Figure 7-3
shows an MFD flowchart identifying what functions are
available via the softkey labels.
The MFD softkeys perform the following functions:
ENGINE – Makes available the LEAN or FUEL and
SYSTEM softkeys which in turn access the Lean
Page and the System Page, respectively (see the
EIS section for more information)
Figure 7-2 MFD Softkeys
BACK
RST FUEL
SYSTEM
ENGINE
LEAN
ENGINE
MAP
DCLTR
BACK
SYSTEM
LEAN
ENGINE
ENGINE
LEAN
BACK
SYSTEM
Press the ENGINE softkey
on any level to return to the
default Engine Page
TRAFFIC
TOPO
TERRAIN
DCLTR-2
DCLTR-3
DCLTR-1
CHKLIST
ASSIST
CYL SLCT
EXIT
EMERGCY
ENGINE
DCLTR
MAP
ENGINE
CHKLIST
CLR
DONE
The DONE softkey changes to
UNDO when the checklist
item is already checked
BACK
Press to return to the
top softkey level
STRMSCP
NEXRAD
XM LTNG
(optional)
(optional) (optional)
Press to return to the
top softkey level
Press to return to the
top softkey level
Press to return to the
top softkey level
DEC FUEL
INC FUEL
DEC FUEL
ENGINE
SYSTEM
FUEL
RST FUEL
INC FUEL
DA 40 TDI (Diesel) Engine
softkey differences
MAP – Enables the following softkeys:
TRAFFIC – Displays/removes Mode S Traffic
on the Navigation Map
TOPO – Displays/removes topographic infor-
mation on the Navigation Map
TERRAIN – Displays/removes terrain infor-
mation on the Navigation Map
BACK – Displays the ENGINE and MAP top
level softkeys
DCLTR (declutter) – Removes map information in
three levels
CHKLIST (checklist) – Displays the Checklist Page