User Guide

190-00649-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42
4-15
AUDIO PANEL AND CNS
CONTROLS
The NAV Frequency Box is controlled by knobs and keys on the left, the COM Frequency Box by knobs and
keys on the right.
NAV controls:
• VOL/PUSH ID Knob
– Turn to adjust the NAV radio volume level
– Press to turn the
Morse code ID ON and OFF
• Frequency Transfer Key
– Press to transfer the NAV frequencies between the
standby and active fields
• Dual NAV Tuning Knob
– Turn to tune a NAV frequency in the NAV tuning box (large knob for MHz, small knob for kHz)
– Press to transfer the NAV tuning box between the NAV1 and NAV2 radios
Figure 4-13 NAV/COM Controls
Frequency Transfer Keys
Dual NAV
Knob
Dual COM
Knob
VOL/PUSH
ID Knob
VOL/PUSH
SQ Knob
NAV Controls COM Controls
Turn to tune desired
frequencies.
Press to change tuning box
positions.
COM controls:
• VOL/PUSH SQ Knob
– Turn to adjust the COM radio volume
– Press to turn
automatic squelch ON and OFF
• Frequency Transfer Key
– Press to transfer the COM frequencies between the active and standby fields
– Press and hold for two seconds to tune the emergency frequency (121.500 MHz) in the active COM field
• Dual COM Tuning Knob
– Turn to tune a COM frequency in the COM tuning box (large knob for MHz; small knob for kHz)
– Press to transfer the COM tuning box between the COM1 and COM2 radios