User Guide

190-00649-00 Rev. A Garmin G1000 Pilot’s Guide for the Diamond DA42 A-2
APPENDIX A
TIS TRAFFIC VOICE ALERTS
NOTE: Voice alerts are provided to the G1000 by the GIA 63 #1. Should this unit fail, audio and voice alerts
are not available.
NOTE: If a Traffic Advisory (TAS) or Traffic Collision Avoidance System (TCAS) is installed as an option,
TIS is not configured and the TIS traffic voice alerts are not generated. Refer to the applicable TAS/TCAS
documentation for information on alerts generated by the TAS/TCAS equipment.
The following voice alerts can be configured for ‘Male’ or ‘Female’ gender from the MFD Auxillary System
Setup Page (refer to the System Overview for more information on the System Setup Page):
Voice Alert Alert Trigger
“Traffic”
Played when a Traffic Advisory (TA) is issued.
“Traffic Not Available” Played when the traffic system fails or cannot communicate
.
G1000 SYSTEM ANNUNCIATIONS
NOTE : Upon power-up, certain windows remain invalid as G1000 equipment begins to initialize. All windows
should be operational within one minute of power-up. If any instrument continues to remain flagged, the
G1000 System should be serviced by a Garmin-authorized repair facility.
When an LRU or an LRU function fails, a large red ‘X’ is typically displayed on windows associated with
the failed data (refer to Figure A-1 for all possible flags and the responsible LRUs). Refer to the Aircraft Flight
Manual (AFM) for additional information regarding pilot responses to these annunciations.
Figure A-1 G1000 System Failure Annunciations
GEA 71,
GIA 63,
or
ECU
GTX 33 or GIA 63
GDC 74A
GIA 63
GDC 74A
GIA 63
GRS 77 or GMU 44
GIA 63
GIA 63
GIA 63 or
DME/ADF Source